Ink streaks and smudges usually come from excess ink, a dirty printhead, or paper that's incompatible with your printer's ink type.

Quick Answer

Clean the printhead, let prints dry fully before handling, and confirm you're using paper rated for your printer's ink type.

On This Page
  1. Common Reasons This Happens
  2. Quick Checks Before Troubleshooting
  3. 1. Clean the Printhead
  4. 2. Wipe Internal Rollers
  5. 3. Switch to Recommended Paper
  6. 4. Replace a Leaking Cartridge
  7. 5. Allow Prints to Fully Dry
  8. What If It's Still Not Fixed?
  9. Frequently Asked Questions

Common Reasons my printer printing streaks

Excess or leaking ink

A damaged or overfilled cartridge can leak ink onto the paper as it feeds through.

A dirty printhead or rollers

Built-up ink residue on internal rollers can transfer onto the page as streaks.

Incompatible paper

Some coated or glossy papers aren't designed for certain ink types and smear before drying.

Handling prints too soon

Touching or stacking pages before ink fully dries causes visible smudging.

Quick Checks Before Troubleshooting

Before you start:
  • Check the cartridge for visible ink residue or leakage around the edges.
  • Confirm the paper type matches your printer's recommended list.
  • Let a fresh print sit untouched for a minute before judging the result.

1. Clean the Printhead

1

Run the standard cleaning cycle to clear excess or uneven ink buildup.

2. Wipe Internal Rollers

2

With the printer off, gently clean accessible rollers with a lint-free cloth lightly dampened with water.

3. Switch to Recommended Paper

3

Use plain or printer-specific paper to rule out an incompatibility issue.

4. Replace a Leaking Cartridge

4

If ink is visibly leaking from the cartridge itself, replace it rather than continuing to clean.

5. Allow Prints to Fully Dry

5

Let each page sit for a minute before stacking or handling, especially with high ink coverage.

What If It's Still Not Fixed?

If you've worked through every step above and the problem continues, it's worth checking a nearby cause rather than repeating the same steps. The guides below cover the most common related issues.

Still stuck? Try describing the problem in your own words using the search bar — different symptoms of the same root cause are often covered on a related page.

Frequently Asked Questions

Photos use far more ink coverage, so they take longer to dry and are more prone to visible streaking or smudging.

People Also Ask

  • Reset the printing system in System Settings, then re-add the printer and confirm it's set as default. Read the full guide →
  • Confirm the printer and computer are on the same network, then reinstall the scanner driver if it still isn't detected. Read the full guide →
  • Remove and reinsert the new cartridge firmly, then power cycle the printer so it re-reads the ink level chip. Read the full guide →
  • Move the printer closer to the router, assign it a static IP address, and reduce or disable its power-saving sleep mode. Read the full guide →

Related Guides

Why Is My Printer Printing Lines? Why Is My Printer Printing Faded Pages? Why Is Printer Ink Not Flowing?